CAN/CAN FD 设备 Tech specs
DS-CAN2
DS-CAN2
SIRIUSim-4xCAN
SIRIUSi-8xCAN
SIRIUSif-8xCAN
SIRIUSiw-8xCAN
USB CAN Device Technical Specifications
| DS-CAN2 | SIRIUSim-4xCAN | SIRIUSi-8xCAN | SIRIUSif-8xCAN | SIRIUSiw-8xCAN | KRYPTONi-2xCAN USB | |
| CAN ports specification | ||||||
| Number of ports | 2 | 4 | 8 + 1 | 8 + 1 | 8 + 1 | 2 |
| Interface type | CAN 2.0B | CAN 2.0B | CAN 2.0B | CAN 2.0B | CAN 2.0B | CAN 2.0B |
| Interface data rate | up to 1 Mbit/sec | up to 1 Mbit/sec | up to 1 Mbit/sec | up to 1 Mbit/sec | up to 1 Mbit/sec | up to 1 Mbit/sec |
| Special protocols | OBDII, J1939, CAN out | OBDII, J1939, CAN out | OBDII, J1939, CAN out | OBDII, J1939, CAN out | OBDII, J1939, CAN out | OBDII, J1939, CAN out |
| Galvanic isolation (Sensor supply not isolated) |
Isolated | Isolated | Isolated | Isolated | Isolated | Isolated |
| Bus pin fault protection | ±36 V | ±36 V | ±36 V | ±36 V | ±36 V | ±36 V |
| Power specification | ||||||
| Power supply | 6 - 36 V DC Startup voltage 7 V |
Max voltage 5.00 V ±0.25 V 2x USB 2.0 powered |
9 - 36 V DC | 9 - 36 V DC | 9 - 36 V DC | 6 - 50 V DC Startup voltage 7 V |
Maximum sensor power consumption |
3 W max total (max 2 W on 15 V) |
2.5 W max total | 1 W per channel | 1 W per channel | 5 W max total (max 3 W on 15 V) |
|
| Maximum power consumption | 5.5 W | 5 W Combined device & sensor consumption |
6.5 W (instrument) + 8 W (sensor) | 6.5 W (instrument) + 8 W (sensor) |
5.5 W | |
| Environmental specification | ||||||
| Interface | USB 2.0 | USB 2.0 | USB 2.0 | USB 2.0 | USB 2.0 | USB 2.0 |
| Connector type | 9 pin D-SUB | 9 pin D-SUB | 9 pin D-SUB | 9 pin D-SUB | 9 pin D-SUB | 9 pin D-SUB |
| Physical dimensions | 105 x 90 x 30 mm 3.94 x 3.54 x 1.18 inch |
145 x 139 x 64 mm 5.71 x 5.43 x 2.52 inch |
266 x 139 x 64 mm 10.47 x 5.43 x 2.52 inch |
266 x 139 x 64 mm 10.47 x 5.43 x 2.52 inch |
282 x 135 x 70 mm 11.10 x 5.47 x 2.76 inch |
213 x 54 x 56 mm (slice) 213 x 54 x 71 mm (with connectors) |
| Weight | Weight 230 g
0.51 lbs |
Weight 800 g
1.76 lbs |
1320 g 2.90 lbs |
1320 g 2.90 lbs |
1930 g 4.25 lbs |
575 g 1.27 lbs |
| Operating temperature | -20°C to +60°C | -10°C to +50°C | -10°C to +50°C | -10 °C to +50 °C | -40 °C to +60 °C | -20 °C to +60 °C |
| Storage temperature | -40°C to +70°C | -40°C to +70°C | -40°C to +70°C | -40 °C to +70 °C | -40 °C to +70 °C | -40 °C to +70 °C |
| Humidity | 5 to 95 % RH non-condensing at 50 °C |
5 to 95 % RH non-condensing at 50 °C |
5 to 95 % RH non-condensing at 50 °C |
5 to 95 % RH non-condensing at 50 °C |
5 to 95 % RH non-condensing at 50 °C |
|
| IP protection | IP50 | IP50 | IP20 | IP50 | IP65 / IP67 | IP50 |
| Rev: 1620302400 | ||||||
EtherCAT CAN Device Technical Specifications
| KRYPTONi-1xCAN | KRYPTONi-1xCAN-FD | |
| CAN ports specification | ||
| Number of ports | 1 | 1 |
| Interface type | CAN 2.0B | CAN-FD, CAN 2.0B |
| Interface data rate | up to 1 Mbit/sec | up to 8 Mbit/sec |
| Special protocols | J1939 (see 1) | J1939 (see 1) |
| Galvanic isolation | Isolated | Isolated |
| Bus pin fault protection | ±28 V | |
| Power specification | ||
| Power supply | 9 - 50 V DC | 9 - 50 V DC |
Maximum sensor power consumption |
5 V / max. 250 mA (1.25 W) 12 V / max. 90 mA (1.1 W) |
5 V / max. 250 mA (1.25 W) 12 V / max. 90 mA (1.1 W) |
| Maximum power consumption | max. 2 W (no load) | |
| Environmental specification | ||
| Interface | EtherCAT, 100 Mbit/s Lemo 1T (1 cable for data, power and sync, daisy chainable) |
EtherCAT, 100 Mbit/s Lemo 1T (1 cable for data, power and sync, daisy chainable) |
| Connector type | DSUB-9 | DSUB-9 |
| Physical dimensions | 62 x 56 x 29 mm | 62 x 56 x 29 mm |
| Weight | 200 g 0.44 lbs |
200 g 0.44 lbs |
| Operating temperature | -40 °C to +85 °C | -40 °C to +85 °C |
| Storage temperature | -40 °C to +85 °C | -40 °C to +85 °C |
| Humidity | ||
| IP protection | IP65 / IP67 | IP65 / IP67 |
| 1) Transmit mode not supported yet. OBDII and XCP plugins not supported yet. No cables included. | ||
| Rev.: 1671516000 | ||