Languages

SIRIUS® XHS  Tech specs

技术图纸 

SIRIUS XHS
 
SIRIUS XHS
SIRIUS XHS-PWR

SIRIUS® XHS  technical drawing
SIRIUS® XHS  technical drawing
SIRIUS® XHS  technical drawing
SIRIUS® XHS  technical drawing

SIRIUS® XHS  technical drawing
SIRIUS® XHS  technical drawing
SIRIUS® XHS  technical drawing
SIRIUS® XHS  technical drawing

技术指标

General specifications

Power specs
Power Supply 9 - 48 V DC
Power consumption Typ. 30 W
Environmental
Operating Temperature -10 to 50 °C
Storage Temperature -40 to 85 °C
Humidity 5 to 95 % RH non condensing @ 60 °C
IP rating IP20
Shock & Vibration Shock (EN 60068-2-27:2009)
75 g, 6 ms, half-sine (25x pos./neg in each axis)
Random Vibration (EN 60721-3-2: 1997 - Class 2M2)
Sweep sinus Vibration (EN 60068-2-6:2008)
Interfaces
Ethernet
1 GbE (XCP, OPC UA) incl. IEEE1588v2 synchronization (PTP) (RJ45)
USB USB 3.0 (Type C)
CAN CAN 2.0 (DSUB9)
Sync Input/Ouput
Level (Input/Output) TTL compatible
Max. Output Current ±24 mA (±50 mA for 1 sec)
Synchronization
Delay between slices ± 1 μs ( to the reference clock )
Max. Sync-cable length 100 m (Master/Slave), 200 m (IRIG)

ADC Filter

ADC
Type Hybrid ADC
High bandwidth mode 16 bit SAR, up to 15 MS/s
Alias free mode 24 bit Sigma Delta, up to 2 MS/s
Digital low pass filter Software selectable (off, alias free)
Analog HW filter Analog 1 MHz 6th order (Butterworth)
Alias free filter 0.5*fs cutoff, 0.45*fs pass band, 0.55*fs stop band to -100dB, zero phase distortion, available below 2MS/s

放大器规格<br>

Overview

XHS-HV XHS-LV XHS-ACC
Connectors BANANA DB9, BNC, BANANA BNC
Channels per slice 8 8 8
Data rate / channel 15 MS/s 15 MS/s 15 MS/s
Resolution 16-bit (24-bit @ 1 MS/s) 16-bit (24-bit @ 1 MS/s) 16-bit (24-bit @ 1 MS/s)
Bandwidth 5 MHz 5 MHz 5 MHz
Voltage ranges ±2000 V ... ±200 V ±100 V ... ±50 mV ±10 V ... ±200 mV
Input coupling DC DC, AC 1 Hz DC, AC 0.1 Hz, AC 1 Hz
Sensor excitation 2.5..30 V bipolar, 2..24 V unipolar, max. 0.2 A / 2 W IEPE 2 mA, 4 mA, 8 mA, 12 mA, 16 mA, 20 mA
Bridge connection
Programmable shunt
IEPE input DSI-ACC
Resistance
Temperature (PTx) DSI-RTD
Thermocouple DSI-TH
Potentiometer
LVDT DSI-LVDT
Charge DSI-CHG
Current ext. shunt
DSI20mA, DSI5A
ext. shunt
TEDS
Isolation voltage CATII 1000 V 1000 V 1000 V
Power consumption per channel (typ.) 1 W/ch 1.2 W/ch 1.3 W/ch
Advanced functions High voltage, high bandwidth, high isolation High sensor excitation and multi range Sensor error detection, high speed
Rev: 1610438400

XHS-HV specifications

Inputs Voltage
ADC Type Hybrid ADC - 24-bit alias free up to 1 MS/s, 16-bit up to 15 MS/s
Sampling Rate Simultaneous 15 MS/s
Filtering AAF 1 MHz (6th order)
Analog bandwidth (-3 dB) 5 MHz
Voltage ranges ±2000 V, ±1000 V, ±400 V, ±200 V
Input Accuracy Signal frequency Accuracy
DC to 1 kHz ±0.03 % of reading ±0.02 % of range
Up to 10 kHz ±0.1 % of reading ±0.05 % of range
Up to 100 kHz ±4 % of reading ±0.1 % of range
Up to 1000 kHz ±5 % of reading ±0.5 % of range
Noise floor, Typ.
Sample rate / Range →
2000 V 1000 V 400 V 200 V
15 MS/s -84 dB -82 dB -79 dB -75 dB
1 MS/s -95 dB -93 dB -85 dB -78 dB
100 kS/s -108 dB -106 dB -100 dB -95 dB
10 kS/s -117 dB -115 dB -109 dB -104 dB
CMR, Typ. 101 dB @ 50 Hz, 74 dB @ 400 Hz
Channel Crosstalk -116 dB typ. @ 50 Hz, -89 dB typ. @ 1 kHz
Gain Drift Typical 20 ppm/K, max. 40 ppm/K
Offset Drift Typical 1.5 mV/K + 1 ppm of range/K, max 3 mV/K + 2 ppm of range/K
Gain Linearity < 0.01 %
Input Coupling DC
Input Impedance 10 MΩ || 1 pF
Overvoltage category CAT II 1000 V
Maximum input voltage 2000 V dc or acrms
Additional Specifications
Input connector Banana
Rev: 1612519200

XHS-LV specification

Inputs Voltage
ADC Type Hybrid ADC - 24-bit alias free up to 1 MS/s, 16-bit up to 15 MS/s
Sampling Rate Simultaneous 15 MS/s
Filtering AAF 1 MHz (6th order)
Analog bandwidth (-3 dB) 5 MHz
Voltage ranges ±100, 50, 20, 10, 5, 2.5, 1, 0.5, 0.25, 0.1 and 0.05 V
Input Accuracy DC ±0.03 % of reading ±0.02 % of range ±100 μV (2 mV for Ranges ≥ 10 V)
Up to 1 kHz ±0.03 % of reading ±0.02 % of range
Up to 10 kHz ±0.1 % of reading ±0.05 % of range
Up to 100 kHz ±2 % of reading ±0.1 % of range
Up to 1000 kHz ±5 % of reading ±0.5 % of range
Noise floor, Typ.
Sample rate, filter \ Range →
100 V 5 V 0.5 V 0.05 V
15 MS/s, Filter off -82 dB -78 dB -65 dB -51 dB
1 MS/s, Filter on -94 dB -95 dB -88 dB -69 dB
100 kS/s, Filter on -104 dB -105 dB -100 dB -81 dB
10 kS/s, Filter on -113 dB -114 dB -107 dB -87 dB
CMR, Typ.
Frequency \ Range → 100 V 5 V 0.5 V 0.05 V
50 Hz 91 dB 102 dB 98 dB 100 dB
400 Hz 86 dB 75 dB 90 dB 98 dB
10 kHz 66 dB 74 dB 82 dB 83 dB
Channel Crosstalk Range ≥ 10 V: -105 dB @ 10 kHz
Range < 10 V: -120 dB @ 10 kHz
Gain Drift Typical 10 ppm/K, max. 30 ppm/K
Offset Drift Range ≥ 10 V: Typ. 100 μV/K + 1 ppm of range/K, Max 250 μV/K + 2 ppm of range/K
Range < 10 V: Typ. 4 μV/K + 1 ppm of range/K, Max 8 μV/K + 2 ppm of range/K
Gain Linearity < 0.03 %
Input Coupling (see 1) DC, AC 1 Hz
Input Impedance Range < 10 V: 10 MΩ; Range ≥ 10 V: 1 MΩ || 110 pF between INx to GND
Overvoltage Protection <10 V: 100 V (200 V peak for 10 msec); Range ≥10 V: 300 V cont.
Excitation Voltage Unipolar or Bipolar Software selectable (programmable 16-bit DAC)
Excitation Level unipolar 2 .. 24 V; Predefined levels: 2, 2.5, 5, 10, 12, 15, 20 and 24 VDC
Excitation Level bipolar 2.5 .. 30 V; Predefined levels: 2.5, 5, 10, 12, 15, 24 and 30 VDC
Drift ±10 ppm/K ±150 μV/K
Stability 10% to 90% load (bipolar) < 0.01 %
Current limit 200 mA (2 Watt max. per Channel, 12 Watt max. per Slice)
Additional Specifications
Input connector DSUB 9, BNC, Banana (others on request)
TEDS support Standard + DSI® adapters
Rev: 1643716000
1) In- must be within ±10 V referred to GND (iso); for Ranges ≥ 10 V the DC value of In- is not rejected

XHS-ACC specification

Inputs
Input types Voltage, IEPE
ADC Type Hybrid ADC - 24-bit alias free up to 1 MS/s, 16-bit up to 15 MS/s
Sampling Rate Simultaneous 15 MS/s
Filtering AAF 1 MHz (6th order)
Analog bandwidth (-3 dB) 5 MHz
Voltage ranges ±10, 5, 2, 1, 0.4 and 0.2 V
Input Accuracy DC ±0.03 % of reading ±0.02 % of range ±50 μV
Up to 1 kHz ±0.04 % of reading ±0.02 % of range
Up to 10 kHz ±0.06 % of reading ±0.05 % of range
Up to 100 kHz ±0.1 % of reading ±0.1 % of range
Up to 1000 kHz ±5 % of reading ±0.5 % of range
Noise floor, Typ.
Sample rate, filter \ Range →
10 V 5 V 2 V 1 V 0.4 V 0.2 V
15 MS/s, Filter off -85 dB -84 dB -83 dB -82 dB -77 dB -72 dB
1 MS/s, Filter on -98 dB -98 dB -97 dB -95 dB -92 dB -87 dB
100 kS/s, Filter on -109 dB -107 dB -108 dB -107 dB -103 dB -98 dB
10 kS/s, Filter on -119 dB -119 dB -119 dB -118 dB -114 dB -109 dB
CMR, Typ. Frequency \ Range → 10 V 5 V 2 V 1 V 0.4 V 0.2 V
50 Hz 141 dB 141 dB 139 dB 133 dB 121 dB 120 dB
400 Hz 130 dB 133 dB 136 dB 137 dB 137 dB 131 dB
1 kHz 122 dB 125 dB 127 dB 129 dB 130 dB 131 dB
Gain Drift Typical 10 ppm/K, max. 30 ppm/K
Offset Drift Typical 0.5 μV/K + 1 ppm of range/K, max. 2 μV/K + 4 ppm of range/K
Gain Linearity < 0.02 %
Inter Channel Phase-mismatch
0.005° * fin [kHz] + 0.0002°
Channel Cross talk -145 dB typ. @ 1 kHz
Input Coupling DC or AC (1 Hz, 0.1 Hz)
Input Impedance 1 MΩ
Overvoltage Protection 50 V continuous; 200 V peak (10 msec)
IEPE mode
Excitation 2 mA, 4 mA, 8 mA, 12 mA, 16 mA, 20 mA
Compliance voltage 24 V
Output Impedance > 10 kΩ
Sensor detection Shortcut: < 4 V; Open: > 19 V
Additional Specifications
Input connector BNC
TEDS support IEPE mode only
Rev: 1623052800

SIRIUS XHS-PWR

SIRIUSi-XHS-PWR specifications
SIRIUSi-XHS-PWR-1xHV-1xDC-CT-1000A-UNI
Input types Voltage, Current (single phase)
Inputs Voltage
ADC Type Hybrid ADC - alias free up to 2 MS/s, 16-bit up to 15 MS/s
Sampling Rate Simultaneous 15 MS/s
Filtering AAF 1 MHz (6th order)
Analog bandwidth (-3 dB) 5 MHz
Voltage ranges ±2000 V, ±1000 V, ±400 V, ±200 V
Working voltage (continuous) 1000 VDC or 1000 VAC
Measuring voltage (max.) ±2000 V (see 1)
Input Accuracy Signal frequency Accuracy
DC ±0.03 % of reading ±0.02 % of range ±0.04 V
DC ±0.03 % of reading ±0.02 % of range
Up to 10 kHz ±0.1 % of reading ±0.05 % of range
Up to 100 kHz ±4 % of reading ±0.1 % of range
Up to 1000 kHz ±5 % of reading ±0.5 % of range
Noise floor, Typ.
Sample rate / Range →
2000 V 1000 V 400 V 200 V
15 MS/s -88 dB -87 dB -85 dB -81 dB
1 MS/s -97 dB -94 dB -89 dB -83 dB
100 kS/s -108 dB -107 dB -101 dB -96 dB
10 kS/s -118 dB -117 dB -111 dB -106 dB
CMR, Typ. (Min.) 101 dB (88 dB) @ 50 Hz, 75 dB (68 dB) @ 400 Hz
Gain Drift Typical 20 ppm/K, max. 40 ppm/K
Offset Drift Typical 1.5 mV/K + 1 ppm of range/K, max 3 mV/K + 2 ppm of range/K
Gain Linearity < 0.01 %
Input Coupling DC
Input Impedance 10 MΩ || 1 pF
Inputs Current
ADC Type HybridADC - alias free up to 2 MS/s, 16-bit up to 15 MS/s
Sampling Rate Simultaneous 15 MS/s
Filtering AAF 1 MHz (6th order)
Analogue bandwidth (-3 dB) > 500 kHz
Current ranges ±2000 A, ±1000 A, ±400 A, ±200 A
Working current (continuous) ±1000 ADC
Measuring current ±2000 ADC
Maximum withstand peak current min. -1700 A, max. 2000 A (see 2)
Primary / Secondary Ratio 1 : 1680
Input Accuracy (Ip @ 10 Arms) Signal frequency Accuracy
DC ±0.1 % of reading ±50 ppm of range ±0.05 A
Up to 10 kHz ±0.3 % of reading
Up to 20 kHz ±0.8 % of reading
Up to 200 kHz ±4 % of reading
Gain drift (current) typ. 40 ppm/K
Offset drift typ. 200 uA/K
Linearity error @ 1000 A range typ. 50 ppm
Hysteresis typ. 50 uA/A
Flatness DC - 50 Hz Overall accuracy @ 25°C
typ. 5 mdB
Flatness 50 Hz - 1 kHz Overall accuracy @ 25°C
typ. 20 mdB
HV harness
Cable size (single core) 120 mm2 95 mm2 70 mm2 50 mm2 35 mm2
Rated DC current 344 A 292 A 245 A 198 A 158 A
Cable gland M32 M32 M32 M25 M25
General specifications
Power
Power Supply 9 - 48 V DC (see 3)
PWR + DATA + SYNC (Lemo 1T 8-pin)
Power consumption Typ. 13 W (Max. 23 W)
Environmental
Operating Temperature -20 °C to 70 °C
Storage Temperature -40 °C to 85 °C
IP rating IP67
Shock & Vibration EN 60068-2-6:2008 Environmental testing -- Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
EN 60068-2-27:2009 Environmental testing -- Part 2-27: Tests - Test Ea and guidance: Shock
Interfaces
Ethernet GbE (XCP, OPC UA) incl. IEEE1588v2 synchronization (PTP) (LEMO 1T 8-pin)
CAN CAN 2.0 (DSUB-9)
Synchronization IEEE1588v2 synchronization (PTP) (LEMO 1T 8-pin), IRIG (D-SUB9)
High-Voltage Interlock HW ready (chassis covers + cables)
Additional Specifications
Grounding M6 insert
Dimensions 245 x 151 x 63 mm
Weight (incl. cables and connectors)
4.4 kg (max. 7 kg)
Rev: 1663912800
1) ±2000 V is measuring range. Device is designed according to IEC 61010-1. Maximum conitnuous working voltage is 1000 VDC or 1000 VAC.
2) ±2000 A is measuring range. Unit can withstand peak value of 2000 A for 100 ms with 1 s recovery time.
3) At the Power Supply lower than 12 V, the maximum measuring current is limited to ±850 A